Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Front Bumper Cover / Fascia: Service and Repair
FRONT FASCIA
REMOVAL
1. Remove the grille.
2. Remove the turn signal lamps.
3. Remove the fascia screws next to the turn signal lamps (6).
4. Remove the two screws at the bottom of the fascia (5).
5. Remove the three plastic rivets (8) securing the fascia (3) to each wheelhouse splash shield.
6. Release the three tabs securing the fascia to the grille opening reinforcement (1).
7. Remove the fascia (3).
INSTALLATION
