Liberty Sport 2WD L4-2.4L VIN 1 (2002)
3. Apply a length of masking tape on the body, parallel to the top edge of the nameplate to use as a guide, if necessary.
4. If temperature is below 21 degrees C (70 degrees F) warm emblem with a heat lamp or gun. Do not exceed 52 degrees C (120 degrees F) when
heating emblem.
5. Using a trim stick C-4755 or equivalent, behind the emblem to separate the adhesive backing from the body.
6. Clean adhesive residue from body with MOPAR(R) Super Clean solvent or equivalent.
INSTALLATION
1. Remove protective cover from adhesive tape on back of emblem.
2. Position emblem properly on body.
