Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Trim Panel: Service and Repair
Pillar Trim
A-Pillar Trim
A-PILLAR TRIM AND GRAB HANDLE
REMOVAL
1. Using a small pry tool or equivalent, remove the grab handle trim plugs (1).
2. Remove the two grab handle screws.
3. Remove the grab handle and A-pillar trim (2) from the A-pillar.
INSTALLATION
1. Snap A-pillar trim (2) and grab handle into the A-pillar.
2. Install the two screws and install the grab handle trim plugs (1).
B-Pillar Lower Trim
B-PILLAR LOWER TRIM
REMOVAL
