Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Trim Panel: Service and Repair
Quarter Panel Trim
QUARTER TRIM PANEL
REMOVAL
1. Using a trim stick C-4755 or equivalent, remove the rear header trim.
2. Using a trim stick C-4755 or equivalent, remove the rear sill plate.
3. Remove the hook pin type connector.
4. Fold down the rear seat.
5. Remove the seat belt anchor and pivot.
6. Remove the belt access panel.
7. Remove the storage cover.
8. Disconnect the 12v power supply electrical connector, if equipped.
INSTALLATION
1. Position the 12v power supply electrical connector, if equipped.
2. Install the storage cover.
3. Install the belt access panel.