Liberty Sport 2WD L4-2.4L VIN 1 (2002)
(1) Remove the inside handle screw plug and remove the screw. (Fig. 10)
(2) Remove the pull handle screw.
(3) Using a trim stick C-4755 or equivalent, disengage the trim panel clips and remove the trim panel.
(4) Disconnect the electrical connectors and the inside handle actuator rod. (Fig. 11)
INSTALLATION
(1) Connect the inside handle actuator rod and the electrical connectors.
(2) Position the trim panel and seat the clips fully
(3) Instal the screws and install the screw plug.
Shifter Bezel
SHIFT BEZEL
REMOVAL
1. Using a trim stick C-4755 or equivalent, pry shift bezel out of the floor console.
