Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Seat Heater Switch: Service and Repair
Driver Seat Heater Switch Replacement
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the appropriate seat cushion side shield.
3. Disconnect the heated seat switch electrical connector. Depress the locking tab and pull straight apart.
4. Working from the underside of the switch, gently rock the switch back and forth out of its mounting location.
INSTALLATION
1. Gently rock the switch back and forth in to its mounting location.
2. Connect the heated seat switch electrical connector.
3. Install the appropriate seat cushion side shield. Refer to the Body section for the procedure.
4. Connect the negative battery cable.
