Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Seat Track: Testing and Inspection
1. Remove the power seat switch from the seat (Refer to POWER SEATS/DRIVER SEAT SWITCH - REMOVAL).
Fig.3 Power Seat Switch Harness Pin Identification
2. Checking the body harness side of the power seat switch electrical connector, check Pin 1 for ground and Pin 5 for battery voltage. If either of
these two are not present repair the body harness as required.
Seat Motor Test
3. To test the seat motors and verify proper seat responses, refer to the Seat Motor Test table below. Using two jumper wires, connect one to a
battery supply and the second to a ground. Connect the other ends to the seat wire harness connector as described in the Seat Motor Test table.
