Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Tailgate Latch: Service and Repair
Latch
LATCH
REMOVAL
1. Remove the trim panel and waterdam.
2. Disconnect the electrical connector and actuator rod at the clip.
3. Remove the screws and remove the latch.
INSTALLATION
1. Install the latch and tighten the screws to 11 N.m (8 ft.lbs.).
2. Connect the electrical connector.
CAUTION: Make sure the latch wire harness is installed forward of the actuator rod.
3. Connect the actuator rod.