Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Front Door Window Glass Weatherstrip: Service and Repair
Windshield A-Pillar Weatherstrip / Retainer
WINDSHIELD A-PILLAR WEATHERSTRIP / RETAINER
REMOVAL
1. Open the doors and peel the A-pillar seal away from the A-pillar/windshield and the side rail weather strip flanges.
2. Remove the seven screws and remove the weatherstrip.
INSTALLATION
1. Position the weatherstrip and install the seven screws.
2. Position the A-pillar seal over the windshield/A-pillar and the side rail weatherstrip flanges and seat fully.