Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Brake Caliper: Service and Repair
Disc Brake Caliper
REMOVAL
1. Install prop rod on the brake pedal to keep pressure on the brake system.
2. Raise and support vehicle.
3. Remove front wheel and tire assembly.
4. Drain small amount of fluid from master cylinder brake reservoir with suction gun.
5. Remove the brake hose banjo bolt if replacing caliper.
6. Remove the caliper mounting slide pin bolts.
7. Remove the caliper from vehicle.
DISASSEMBLY
1. Remove brake shoes from caliper.
2. Drain brake fluid out of caliper.
Padding Piston
3. Take a piece of wood and pad it with one-inch thickness of shop towels. Place this piece in the outboard shoe side of the caliper in front of the
piston. This will cushion and protect caliper piston during removal.
