Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Cruise Control Servo: Service and Repair
REMOVAL
1. Disconnect negative battery cable at battery.
Fig.5 Speed Control Servo
2. Disconnect vacuum line at servo.
3. Disconnect electrical connector at servo.
4. Remove coolant bottle nuts/bolts. Position bottle forward a few inches.
5. Disconnect servo cable at throttle body Refer to servo Cable Removal/Installation.
6. Remove servo bracket mounting nuts.
Fig.6 Servo Cable Clip Remove/Install - Typical
7. Remove 2 mounting nuts holding servo cable sleeve to bracket.
8. Pull speed control cable sleeve and servo away from servo mounting bracket to expose cable retaining clip and remove clip. Note: The