Liberty Sport 2WD L4-24L Cruise Control Vacuum Reservoir - Specifications
Fig.9 Vacuum Reservoir Remove/Install
5. From bottom of instrument panel, remove 1 vertically mounted screw.
6. Remove reservoir from instrument panel.
INSTALLATION
The vacuum reservoir is located behind, and at the outer end of the instrument panel. To gain access for testing or removal, remove glovebox
assembly. Also remove fuse box access cover panel at end of instrument panel. On vehicles equipped with LHD (Left Hand Drive), this fuse access
panel is located at right end of instrument panel. On vehicles equipped with RHD (Right Hand Drive), this access panel is located at left end of
instrument panel.
1. Position reservoir to instrument panel.
2. Install 3 mounting screws and tighten. Refer to torque specifications.
3. Connect vacuum line to reservoir fitting.
4. Install glovebox assembly.
5. Install fuse box access cover panel.
