Liberty Sport 2WD L4-2.4L VIN 1 (2002)
^
When removing the radiator or A/C condenser for any reason, note the location of all radiator-to-body and radiator-to-A/C condenser rubber air
seals. These are used at the top, bottom and sides of the radiator and A/C condenser. To prevent overheating, these seals must be installed to their
original positions.
1. Disconnect the negative battery cable at battery.
2. Drain coolant from radiator.
3. Remove the front grill.
4. Remove the cooling fan from the engine, if equipped.
5. Remove the two radiator mounting bolts.
6. Disconnect both transmission cooler lines from radiator.
7. Disconnect the connector for the electric fan.
8. Disconnect the power steering cooler line from cooler.
9. Disconnect the radiator upper and lower hoses.
10. Disconnect the overflow hose from radiator.
