Liberty Sport 2WD L4-2.4L VIN 1 (2002)
1. Assemble fan blade to viscous fan drive. Tighten mounting bolts to 27 Nm (20 ft. lbs.) torque.
NOTE: The vicous fan and fan shroud must be installed as an assembly.
2. Gently lay vicous fan into fan shroud.
3. Install the fan shroud to radiator mounting bolts, torque bolts to (5.5 Nm or 50 in. lbs.).
4. Thread the fan and fan drive onto the water pump pulley, and tighten nut using special tool 6958 spanner wrench and 8346 adapters.
5. Connect the electrical connector for the electric fan.
CAUTION: When installing a serpentine accessory drive belt, the belt MUST be routed correctly. If not, the engine may overheat due to the
water pump rotating in the wrong direction. Refer to Engine, Drive Belts, Mounts, Brackets and Accessories for correct belt routing.
