Liberty Sport 2WD L4-2.4L VIN 1 (2002)
5. Remove the two fan shroud mounting bolts connecting the fan shroud to the radiator.
6. Remove the shroud and fan from the vehicle.
INSTALLATION
NOTE: For 3.7L Heavy Duty/Max Cool/Trailer Tow cooling package, the viscous fan cannot be installed separate from the shroud. Both fan and
shroud must be installed together.
1. Gently lay viscous fan into shroud.
2. Install fan shroud assembly into the vehicle. Tighten fan shroud to radiator bolts to (5.5 Nm (50 in. lbs.).
3. Using special tool 6958 spanner wrench and 8346 adapters, install the viscous fan on the water pump.
4. Connect fan motor wire connector to harness connector, and attach connector to shroud.
5. Connect battery negative cable.
6. Start engine and check fan operation.
