Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
VIBRATION DAMPER
REMOVAL
1. Remove accesory drive belts.
2. Remove crankshaft damper bolt.
Fig. 70 Crankshaft Vibration Damper Removal - Typical
3. Remove damper using Special Tool 3-Jaw Puller 1026 and Insert 6827-A (Fig. 70).
INSTALLATION
Fig. 71 Crankshaft Vibration Damper Installation - Typical
1. Install crankshaft vibration damper using M12 1.75 x 150 mm bolt, washer, thrust bearing and nut from Special Tool 6792 (Fig. 71).
2. Install crankshaft vibration damper bolt and tighten to 142 Nm (105 ft. lbs.).
3. Install accessory drive belts.
