Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Engine Mount: Service and Repair
Structural Collar/Cover
STRUCTURAL COLLAR
REMOVAL
1. Raise vehicle on hoist
2. Remove structural collar attaching bolts.
3. Remove collar.
INSTALLATION
CAUTION: Torque procedure for the structural collar must be followed or damage could occur to oil pan and collar.
1. Perform the following steps for installing structural collar.
^
Step 1: Position collar between transmission and oil pan. Install collar to transmission bolts, hand start Only.
^
Step 2: Install collar to oil pan bolts, hand snug only.
^
Step 3: Tighten collar to transmission bolts.
^
Step 4: Tighten collar to oil pan bolts.
2. Lower vehicle.
