Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Oil Filter: Service and Repair
OIL FILTER
REMOVAL
1. Raise vehicle on hoist.
2. Position an oil collecting container under oil filter location.
CAUTION: When servicing the oil filter, avoid deforming the filter can by installing the remove/install tool band strap against the can to base
lock seam. The lock seam joining the can to the base is reinforced by the base plate.
Fig. 79 Oil Filter - Typical
3. Using a suitable filter wrench, turn oil filter (Fig. 79) counterclockwise to remove.
INSTALLATION
1. Clean and check filter mounting surface. The surface must be smooth, flat and free of debris or pieces of gasket.
2. Lubricate new oil filter gasket with clean engine oil.
3. Screw oil filter on until the gasket contacts base. Tighten to 21 Nm (15 ft. lbs.).
