Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Camshaft Oil Seal: Service and Repair
CAMSHAFT OIL SEAL(S)
REMOVAL
1. Remove timing belt.
Fig. 12 Camshaft Sprocket Removal/Installation
2. Hold each camshaft sprocket with Special Tool 6847 while removing center bolt (Fig. 12).
3. Remove camshaft sprockets.
4. Remove exhaust camshaft target ring.
5. Remove exhaust camshaft sensor.
CAUTION: Inspect sensor and target ring for excessive wear. Clean sensor face and install new spacer pad.
6. Remove rear timing belt cover.
Fig. 13 Camshaft Oil Seal Removal With C-4679-A
7. Remove camshaft seal using Special Tool C-4679-A (Fig. 13).
CAUTION: Do not nick shaft seal surface or seal bore.
INSTALLATION
