Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Fig. 57 Rear Crankshaft Seal And Special Tool 6926-1
1. Place Special Tool 6926-1 Seal Guide on crankshaft (Fig. 57).
2. Position seal over guide tool (Fig. 57). Guide tool should remain on crankshaft during installation of seal. Ensure that the lip of the seal is facing
towards the crankcase during installation.
CAUTION: If the seal is driven into the block past flush, this may cause an oil leak.
Fig. 58 Crankshaft Seal And Special Tools 6926-2 And C-4171