Liberty Sport 2WD L4-2.4L VIN 1 (2002)
CAUTION: The crankshaft sprocket is set to a predetermined depth from the factory for correct timing belt tracking. If removed, use of Special Tool
6792 is required to set the sprocket to original installation depth. An incorrectly installed sprocket will result in timing belt and engine damage.
Fig. 101 Crankshaft Sprocket Installation
1. Install crankshaft sprocket using Special Tool 6792 (Fig. 101).
2. Install timing belt.
INSTALLATION - TIMING BELT
CAUTION: The crankshaft sprocket is set to a predetermined depth from the factory for correct timing belt tracking. If removed, use of Special Tool
6792 is required to set the sprocket to original installation depth. An incorrectly installed sprocket will result in timing belt and engine damage.
1. Set crankshaft sprocket to TDC by aligning the sprocket with the arrow on the oil pump housing.
Fig. 102 Camshaft Sprocket Alignment
2. Set camshafts timing marks so that the exhaust camshaft sprocket is a 1/2 notch below the intake camshaft sprocket (Fig. 102).
CAUTION: Ensure that the arrows on both camshaft sprockets are facing up.
