Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Fig.17 HVAC Door Vacuum Actuators
3. Unplug the vacuum harness connector from the floor door actuator.
Fig.18 Vacuum Actuator Remove/Install - Typical
4. Insert a trim stick or another suitable wide flat-bladed tool into the latch hole on the HVAC housing actuator mount. Gently pry the actuator latch
while pulling firmly outwards on the actuator to remove the actuator from the mount.
5. Rotate and tilt the vacuum actuator as required to disengage the hole on the end of the actuator link from the hooked pin on the end of the floor