Liberty Sport 2WD L4-2.4L VIN 1 (2002)
door lever.
6. Remove the floor door vacuum actuator from the vehicle.
INSTALLATION
Panel Door Actuator
1. Install the defrost door vacuum actuator by snapping it into place, engage the hole on the end of the actuator link with the hooked pin on the end of
the panel/demist door lever.
2. Plug in the vacuum harness connector to the defrost door actuator.
3. Install the instrument panel assembly in the vehicle.
4. Connect the battery negative cable.
Floor - Defrost Door Actuator
1. Engage the hole on the end of the actuator link to the hooked pin. Install the floor-defrost door vacuum actuator to the HVAC assembly. on the end
of the floor door lever.
2. Install the floor door vacuum actuator to the HVAC assembly.
3. Install the instrument panel assembly into the vehicle.
4. Connect the battery negative cable.
