Liberty Sport 2WD L4-2.4L VIN 1 (2002)
4. Gently pry the actuator latch while pulling firmly outwards on the actuator to remove the actuator from the mount.
5. Disengage the hole on the end of the actuator link from the hooked pin on the end of the recirculation door lever.
6. Remove the recirculation door vacuum actuator from the vehicle.
INSTALLATION
1. Install the recirculation door vacuum actuator by slipping the arm on to the hole on the end of the actuator link with the hooked pin on the end of
the panel/demist door lever.
2. Snap the actuator back into its mount.
3. Plug in the vacuum harness connector to the recirculation door actuator.
4. Connect the battery negative cable.
