Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Air Duct: Removal and Replacement
Cowl / Plenum Seal
COWL / PLENUM SEAL
REMOVAL
1. Remove the cowl grille.
2. Remove the seal from the plenum flange above the air inlet duct.
INSTALLATION
NOTE: Seal should not be touching the plenum baffle flange seal.
1. Position the seal on the plenum flange and seat fully.
2. Install the cowl grille.
Cowl / Plenum Window Baffle Seal
COWL / PLENUM WINDOW BAFFLE SEAL
REMOVAL
1. Remove the cowl grille.
2. Remove the seal from the window below the cowl/plenum seal.
INSTALLATION
1. Position the seal against the upper flange of the inner plenum window below the cowl/plenum seal and seat fully.
2. Install the cowl grille.
