Liberty Sport 2WD L4-2.4L VIN 1 (2002)
OTIS Removal
2. Remove mounting screws and release the map lamp wire connector from the compass mini-trip computer. (Fig. 6).
3. Remove the compass mini-trip computer from the overhead console.
INSTALLATION
1. Install the compass mini-trip computer in the overhead console. Align the compass mini-trip computer guides on the housing with the grooves of
the console.
2. Install the mounting screws and install the map lamp wire connector on the compass mini-trip computer. Make sure the LOOP of wire that was
clipped into the compass mini-trip computer module housing is properly clipped into the new module before the console is placed back into the
headliner.
3. Install the overhead console, refer to Console Installation in this section.
Setting Magnetic Zone Variance
STANDARD PROCEDURE - COMPASS VARIATION ADJUSTMENT
Compass variance, also known as magnetic declination, is the difference in angle between magnetic north and true geographic north. In some
geographic locations, the difference between magnetic and geographic north is great enough to cause the compass to give false readings. If this
problem occurs, the compass variance setting may need to be changed.
To set the compass variance:
Fig.7 Magnetic Variance Settings
