Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Fig.25 Headlamp Bulb Boot Seal Remove
3. Firmly grasp the tab of the headlamp boot seal on the back of the headlamp unit housing.
4. Pull the tab away from the back of the headlamp unit housing to remove the boot seal from the housing and the bulb base.
Fig.26 Headlamp Bulb Retainer Clip Engage/Disengage
5. Pinch the two hooked ends of the wire headlamp bulb retainer clip together and disengage them from the slots in the flange of the reflector.
6. Pivot the headlamp bulb retainer clip up off of the bulb flange and out of the way.
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life
will result.
