Liberty Sport 2WD L4-2.4L VIN 1 (2002)
3. Align the ball formation on the end of the leveling motor pushrod with the socket on the headlamp unit reflector (Fig. 33).
4. While continuing to pulling the reflector toward the motor, firmly steadily and forcefully push the headlamp leveling motor straight into the back
of the headlamp unit housing to snap the ball formation on the end of the motor pushrod into the socket on the headlamp unit reflector.
5. After the pushrod is engaged to the reflector, remove your fingers from the bulb mounting hole in the center of the headlamp reflector and
thoroughly clean any fingerprints from the reflector.
6. Push the mounting flange of the headlamp leveling motor into the mounting hole on the back of headlamp unit housing unit the motor is firmly
seated (Fig. 32).
7. Rotate the headlamp leveling motor on the back of the headlamp unit housing clockwise about 30 degrees.
8. Reinstall the headlamp bulb into the headlamp unit housing. (Refer to LAMPS/ LIGHTING - EXTERIOR/HEADLAMP BULB -
INSTALLATION)
9. Reconnect the battery negative cable.
