Liberty Sport 2WD L4-2.4L VIN 1 (2002)
License Plate Bulb: Service and Repair
License Plate Lamp Bulb Replacement
REMOVAL
North America
1. Disconnect and isolate the battery negative cable.
Fig.45 License Plate Lamp Bulb Remove/Install - North America
2. Reach through the opening in the rear bumper fascia between the license plate and the lamp to access and firmly grasp the socket on the back of
the license plate lamp unit housing (Fig. 45).
3. Pull the socket and bulb straight out of the back of the license plate lamp unit housing.
4. Pull the bulb straight out of the license plate lamp unit socket.
Rest-Of-World
1. Disconnect and isolate the battery negative cable.
Fig.46 License Plate Bracket - Rest-OF-World
2. Unsnap and lift up the bottom of the license mounting plate far enough to access and remove the two screws that secure the license plate bracket to
the special lug nuts on the spare tire (Fig. 46).