Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Fig. 99 Locking Timing Tensioner
10. Install 6 mm Allen wrench into belt tensioner. Before rotating the tensioner, insert the long end of a 1/8" or 3 mm Allen wrench into the pin hole
on the front of the tensioner (Fig. 99). While rotating the tensioner counterclockwise, push in lightly on the 1/8" or 3 mm Allen wrench, until it
slides into the locking hole.
11. Remove timing belt.
REMOVAL - CRANKSHAFT SPROCKET
1. Disconnect negative battery cable.
2. Remove timing belt.
Fig. 100 Crankshaft Sprocket Removal
3. Remove crankshaft sprocket using Special Tools 6793 and insert C-4685-C2 (Fig. 100).
CLEANING
1. Do Not attempt to clean a timing belt. If contamination from oil, grease, or coolants have occurred, the timing belt should be replaced.
2. Clean all sprockets using a suitable solvent. Clean all sprocket grooves of any debris.
INSTALLATION - CRANKSHAFT SPROCKET
