Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Fig.34 Map Sensor Location - 2.4L
10. Disconnect 2 main engine harness connectors at rear of intake manifold (Fig. 34).
11. Disconnect 2 injection wiring harness clips at harness mounting bracket (Fig. 35).
Fig.37 Remove/Install Injector Connector
12. Disconnect electrical connectors at all 4 fuel injectors. To remove connector refer to (Fig. 37). Push red colored slider away from injector (1).
While pushing slider, depress tab 2. and remove connector 3. from injector. The factory fuel injection wiring harness is numerically tagged (INJ 1,
INJ 2, etc.) for injector position identification. If harness is not tagged, note wiring location before removal.
