Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Fig.29 Throttle Cable Pin - 3.7L
2. Hold throttle in wide open position. While held in this position, slide throttle cable pin (Fig. 29) into throttle body bellcrank.
3. Push cable housing into rubber grommet and through opening in dash panel.
Fig.28 Accelerator Pedal/Bracket Assembly
4. From inside vehicle, install metal clip holding cable to dashpanel (Fig. 28).
5. From inside vehicle, slide throttle cable core wire into opening (slot) in top of pedal arm.
6. Push plastic cable retainer (clip) into pedal arm opening until it snaps in place.
7. Install air box to throttle body
8. Before starting engine, operate accelerator pedal to check for any binding.