Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Ignition Coil: Description and Operation
Fig.14 Ignition Coil - 2.4L
IGNITION COIL
The coil assembly consists of 2 different coils molded together. The assembly is mounted to the top of the engine.
The coil fires two spark plugs simultaneously. One plug is under compression, the other plug fires on the exhaust stroke (lost spark). Coil number
one fires cylinders 1 and 4, and coil number two fires cylinders 2 and 3.
The Auto Shutdown (ASD) relay provides battery voltage to the ignition coil. The PCM provides a ground contact (circuit) for energizing the
coil(s). The PCM will de-energize the ASD relay if it does not receive the crankshaft position sensor and camshaft position sensor inputs.
Base ignition timing is not adjustable. By controlling the coil ground circuit, the PCM is able to set the base timing and adjust the ignition timing
advance. This is done to meet changing engine operating conditions.
The ignition coil is not oil filled. The windings are embedded in an epoxy compound. This provides heat and vibration resistance that allows the
ignition coil to be mounted on the engine.
Spark plug cables (secondary wires or cables) are used with this engine.
