Liberty Sport 2WD L4-2.4L VIN 1 (2002)
REPLACEMENT PARTS LISTED IN THE MOPAR PARTS CATALOG.
1. Position the rear outboard seat belt and retractor to the C-pillar as a unit.
2. Engage the retractor tab into the engagement hole in the lower C-pillar.
3. Install and tighten the screw that secures the retractor bracket to the lower C-pillar. Tighten the screw to 43 Nm (32 ft. lbs.).
4. Route the seat belt lower anchor and turning loop through the access hole in the quarter trim panel.
5. Reinstall the quarter trim panel onto the C-pillar.
6. Position the lower seat belt anchor to the bracket on the outboard side of the rear seat cushion frame. Be certain that the anti-rotation tab on the
anchor is engaged in the slot in the seat bracket.
7. Install and tighten the screw that secures the lower seat belt anchor to the bracket on the outboard side of the rear seat cushion frame. Tighten the
screw to 43 Nm (32 ft. lbs.).
8. Position the seat belt turning loop to the upper C-pillar.
9. Install and tighten the screw that secures the seat belt turning loop to the upper C-pillar. Tighten the screw to 43 Nm (32 ft. lbs.).
10. Fold and snap the trim cover back into place to conceal the screw that secures the rear outboard seat belt turning loop to the upper C pillar.
