Liberty Sport 2WD L4-2.4L VIN 1 (2002)
switch housing with the saddle formations of the two stanchions on the back of the instrument panel trim, just below and to either side of the
button opening.
5. Using hand pressure, press upward on the back of the hazard switch until the latch tabs of the mounting bracket on the back of the switch are both
engaged with the instrument panel trim.
6. Install and tighten the screw at the top of the instrument panel radio opening that secures the hazard switch to the instrument panel trim. Tighten
the screw to 2 Nm (17 in. lbs.).
7. Reinstall the radio into the instrument panel. (Refer to AUDIO/RADIO - INSTALLATION).
8. Reconnect the battery negative cable.
