Liberty Sport 2WD L4-2.4L VIN 1 (2002)
9.
Remove and discard the lower ball joint nut (Figure 2).
10.
Separate the lower ball joint from the lower control arm using special tool C-4150A (Figure 3).
11.
Remove and discard the upper ball joint nut.
CAUTION:
Use care so that the upper ball joint boot is not damaged.
12.
Separate the upper ball joint from the knuckle using tool C-4150A (Figure 4).
CAUTION:
Do not use a "pickle fork" type tool to separate the upper ball joint from the steering knuckle. Upper ball joint boot damage may occur.
13.
Carefully remove the steering knuckle from the vehicle.
14.
For vehicles with four wheel drive, move the axle shaft to the side and support the axle shaft.
15.
Secure the steering knuckle in a vise.