Liberty Sport 2WD L4-2.4L VIN 1 (2002)
3.
Separate the tie rod end from the steering knuckle using special tool C-3894A (Figure 1).
CAUTION:
Do not use a "pickle fork" type tool to separate the tie rod end from the steering knuckle. Tie rod end boot damage may occur.
4.
Remove the brake caliper adapter bolts and then remove the adapter and brake caliper as an assembly (Figure 2).
CAUTION:
Never allow the disc brake caliper and adapter to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang
the caliper assembly securely.
5.
Place a mark on one of the wheel studs and rotor to index the rotor to the hub.
6.
Remove and discard the brake rotor retaining clips and then slide the brake rotor off of the axle hub.
7.
For vehicles with ABS, remove the wheel speed sensor.
8.
For four wheel drive vehicles, remove the axle shaft nut (Figure 1).
