Liberty Sport 2WD L4-2.4L VIN 1 (2002)
6. If rotating torque is low, hold pinion yoke with Wrench 6958 (Fig. 37) and tighten pinion shaft nut in 6.8 Nm (5 ft. lbs.) increments until rotating
torque is achieved.
CAUTION: If maximum tightening torque is reached prior to reaching the required rotating torque, the collapsible spacer may have been damaged.
Replace the collapsible spacer.
7. Align the installation reference marks on the propeller shaft and pinion yoke and install the propeller shaft.
8. Fill differential with gear lubricant.
9. Install the brake drums
10. Install wheel and tire assemblies.
11. Lower the vehicle.
