Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Axle Bearing: Service and Repair
Rear Axle - 198RBI
Removal and Installation - Rear Axle Bearings/Seals 198RBI
REMOVAL
1. Remove axle shaft from vehicle.
2. Drill a shallow hole into soft steel axle bearing retaining ring with a 3/8 inch drill bit (Fig. 25). Use a drill depth stop to avoid marking the axle.
3. With a cold chisel cut the retaining ring across drilled hole. (Fig. 26)
4. Slide retaining ring from axle shaft.