Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Axle Bearing: Service and Repair
Rear Axle - 8 1/4 Inch
Removal and Installation - Rear Axle Bearings/Seals 8 1/4 inch
REMOVAL
1. Raise and support vehicle.
2. Remove axle shaft.
3. Remove axle shaft seal from the axle tube with a small pry bar (Fig. 22).
NOTE: The seal and bearing can be removed at the same time with the bearing removal tool.
4. Remove axle shaft bearing with Bearing Removal Tool Set 6310 and Adapter Foot 6310-9 (Fig. 23).
INSTALLATION
1. Wipe the axle tube bore clean. Remove any old sealer or burrs from the tube.
