Liberty Sport 2WD L4-2.4L VIN 1 (2002)
2. Install axle shaft bearing with Installer C-4198 and Handle C-4171.
NOTE: Install bearing with part number against the installer.
3. Install a new axle seal with Installer C-4198 and Handle C-4171. When the tool contacts the axle tube, the seal is installed to the correct depth.
4. Coat the lip of the seal with axle lubricant for protection prior to installing the axle shaft.
5. Install the axle shaft.
6. Check and fill gear lubricant.
7. Install wheel and tire assembly.
8. Remove support and lower vehicle.
