Liberty Sport 4WD L4-2.4L VIN 1 (2002)
CD Changer: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the right rear quarter trim panel.
Fig.4 CD Changer
3. Disconnect the electrical wire harness connector.
4. Remove the mounting nuts.
5. Remove the CD Changer from the vehicle.
INSTALLATION
1. Install the CD Changer to the vehicle.
2. Install the mounting nuts. Tighten to 11.8 Nm (104 in. lbs.).
3. Connect the wire harness connector.
4. Install the right rear quarter trim panel.
5. Connect the battery negative cable.
