Liberty Sport 4WD L4-2.4L VIN 1 (2002)
Seat Track: Service and Repair
REMOVAL
1. Remove the appropriate seat from the vehicle.
2. Remove the seat cushion side shield from the seat.
3. Remove four seat track mounting bolts from cushion pan.
4. Disconnect the power seat electrical and remove the seat track from the seat cushion.
INSTALLATION
1. Position the seat track and install the retaining bolts in the seat cushion pan. Torque the bolts to 45 - 60 Nm.
2. Route and connect the power seat electrical on the seat track and cushion pan.
3. Install the seat cushion side shield on the seat. Refer to the Body section for the procedure.
4. Install the seat in the vehicle.
5. Connect the negative battery cable.
