Liberty Sport 4WD L4-2.4L VIN 1 (2002)
Power Seat Switch: Description and Operation
Fig.1 KJ Power/Heated Seat
LEFT POWER SEAT SWITCH
Vehicles equipped with the power seat option utilize a six-way power seat switch. This six-way power seat switch features one seat cushion shaped
knob, visible on the outboard seat cushion side shield.
The switch is secured to the back of the seat cushion side shield with two screws. However, the control knob must be removed before the seat
switch can be removed from the side shield.
The individual switches internal to the power seat switch cannot be repaired. If one switch is damaged or faulty, the entire power seat switch unit
must be replaced.
The power seat tracks can be adjusted in six different ways using the power seat switches. See the owner's manual in the vehicle glove box for
more information on the power seat switch functions and the seat adjusting procedures.
When a power seat switch control knob or knobs are actuated, a battery feed and a ground path are applied through the switch contacts to the
power seat track adjuster motor. The selected adjuster motor operates to move the seat track through its drive unit in the selected direction until the
switch is released, or until the travel limit of the seat track is reached. When the switch is moved in the opposite direction, the battery feed and
ground path to the motor are reversed through the switch contacts. This causes the adjuster motor to run in the opposite direction.
No power seat switch should be held applied in any direction after the seat track has reached its travel limit. The power seat adjuster motors each
contain a self-resetting circuit breaker to protect them from overload. However, consecutive or frequent resetting of the circuit breaker must not be
allowed to continue, or the motor may be damaged.
RIGHT POWER SEAT SWITCH
Vehicles equipped with the power seat option utilize a six-way power seat switch. This six-way power seat switch features one seat cushion shaped
knob, visible on the outboard seat cushion side shield.
The switch is secured to the back of the seat cushion side shield with two screws. However, the control knob must be removed before the seat
switch can be removed from the side shield.
The individual switches internal to the power seat switch cannot be repaired. If one switch is damaged or faulty, the entire power seat switch unit
must be replaced.
The power seat tracks can be adjusted in six different ways using the power seat switches. See the owners manual in the vehicle glove box for
more information on the power seat switch functions and the seat adjusting procedures.
When a power seat switch control knob or knobs are actuated, a battery feed and a ground path are applied through the switch contacts to the
power seat track adjuster motor. The selected adjuster motor operates to move the seat track through its drive unit in the selected direction until the
