Liberty Sport 4WD L4-2.4L VIN 1 (2002)
5. Using a trim stick C-4755 (1) or equivalent, release the lower locking tabs (2) and remove the hinge cover.
INSTALLATION
NOTE: Inspect the hinge cover retention tabs. If they are damaged or cracked, discard the cover and replace with a new one.
1. Install the hinge onto the vehicle and align with marks made previously.
2. Install the hinge to glass bolt (1) and tighten to 10 N.m (90 in.lbs.).
3. Install the bolts (3) and tighten to 7 N.m (60 in.lbs.).
4. Adjust the flip-up glass as necessary.
5. Install the support cylinders (2).
