Liberty Sport 4WD L4-2.4L VIN 1 (2002)
Fig. 74 Transmission Mount - 2.4L Manual Trans
Fig. 75 Transmission Mount - 3.7L 2WD Manual Trans
1. Install the support cushion to the transmission (Fig. 74) or (Fig. 75). Install the bolts and tighten.
2. Position the crossmember in the vehicle. Install the crossmember to mount through bolt and nut.
3. Install crossmember-to-sill bolts and tighten to 41 Nm (30 ft. lbs.) torque.
4. Remove the transmission support.
5. Lower the vehicle.
6. Connect negative cable to battery.
