Liberty Sport 4WD L4-2.4L VIN 1 (2002)
7.
Immediately wipe any excess sealant from the face of the center cap and aluminum wheel with a clean rag.
8.
Once the excess sealant has been removed, use a rag and brake parts cleaner to remove remaining sealant residue. Make sure clean-up is
performed immediately. Make sure no excess sealant residue remains on the face of the wheel or center cap.
9.
Install the wheel and tire assembly to the vehicle. Tighten the wheel lug nuts to 136 Nm (100 ft. lbs.).
10.
Repeat steps 2 through 9 for the remaining three road wheels and the spare tire wheel. Tighten the spare tire and wheel assembly lug nuts to 115
Nm (85 ft. lbs.).
NOTE:
ALLOW THE VEHICLE TO SET IN A DRY ENVIRONMENT FOR A HALF HOUR BEFORE USE.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
