Liberty Sport 4WD L4-2.4L VIN 1 (2002)
5.
Connect the wire harness connector to the revised speaker, p/n 56038593AH.
6.
Install the speaker and mounting screws. Tighten the screws to 2.3 Nm (20 in. lbs.).
7.
Install the front door trim panel.
8.
If necessary, repeat steps 2 through 7 for the other front door speaker.
9.
Connect the battery negative cable.
10.
Verify that the time on the vehicle clock is set correctly.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE: