Liberty Sport 4WD L4-2.4L VIN 1 (2002)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Fig.12 TPS/IAC Motor - 2.4L
REMOVAL
The Idle Air Control (IAC) motor is located on the rear side of the throttle body.
1. Disconnect electrical connector from IAC motor.
2. Remove two mounting bolts (screws).
3. Remove IAC motor from throttle body.
INSTALLATION
The Idle Air Control (IAC) motor is located on the rear side of the throttle body
1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in. lbs.) torque.
3. Install electrical connector.
