Liberty Sport 4WD L4-2.4L VIN 1 (2002)
Fuel Pressure Regulator: Service and Repair
Fig.19 Fuel Pressure Regulator/Sending Unit Electrical Connector
REMOVAL
The fuel pressure regulator is located in the fuel tank. It is attached to the bottom of the upper section of the fuel pump module with a quick-connect
fitting (Fig. 19). The fuel pump module is supplied in 2 sections (upper and lower). To replace the pressure regulator, the bottom section of the fuel
pump module must be replaced.
1. Remove upper and lower sections of fuel pump module from fuel tank. Refer to Fuel Pump Module Removal/Installation.
2. Replace lower section of fuel pump module (includes fuel pressure regulator).
INSTALLATION
The fuel pressure regulator is located in the fuel tank. It is attached to the bottom of the upper section of the fuel pump module with a quick-connect
fitting. The fuel pump module is supplied in 2 sections (upper and lower). To replace the pressure regulator, the bottom section of the fuel pump
module must be replaced.
1. Replace lower section of fuel pump module (includes fuel pressure regulator).
2. Install upper and lower sections of fuel pump module to fuel tank. Refer to Fuel Pump Module Installation.
